Discussion Locked

Bootup Problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi:

I made a mistake by not preparing an ERD (Emergency Repair
Disk), and now my computer is giving me the following
error:

"Windows could not start because the following file is
missing or corrupted
\WINNT\SYSTEM32\CONFIG\SYSTEM
You can attempt to repair the file by starting windows set
up using the original setup CD ROM. select 'r' at the
first screen to start the repair."

I inserted ORIGINAL CD, tried to reboot.

Originally I was asked to choose to repair by
selecting 'r' or to set up by selecting 'c', and i
chose 'r'.

Then it asked me to select 'r' for emergency set up
or 'L' for some other option. I chose 'L' as I had no
Emergenncy repair Disk available. And the computer just
hungup there.

Now when I am trying to bootup by inserting my Original
Windows CD, it is even not asking me any options. It is
just givingme the original message "Windows could not
start because.................".

What can I do now?

Any suggestion? Please send me an EMail also.

Thanks,

Muhammad Riyaz
11673 Sandalwood Lane
Manassas, vA 20112
mr1827@hotmail.com
703.680.7566

2 replies

by 1stladytech

Sounds like you have corrupted your hive files. Microsoft has a very long tech file of how to repair this error, but it is easier if you have another computer available, preferrably running Win2k. Reject this answer and let me know what other computers/operating systems you have available that would see the corrupted hdd and I will outline the procedures that I use to recover this type of error.

Vickie

by 1stladytech

The easiest way to recover from corrupt hive files is to pull the drive out of the computer and hang it in as a slave in a Win2K box.
On the hard drive that has the corruption, go to Windows\system32\config\ and rename the Default, Sam, Security, Software and System files ? they have no extensions so I usually just add .old to the end of each file.
Then go to the System Volume Information directory (make sure you have all files and folders shown, including Hidden and System). You may have to take ownership of this directory and subdirectories, make sure that you are logged in as Administrator. Under the directory will be another directory, inside that will be a series of directories. Choose on with a creation date prior to the date that you started having problems, and in that directory you should see a directory named Snapshot. You need to copy the backup copies of the 5 files that were renamed before (named System_restore_sam, etc) and then paste the files to the C:\Windows\system32\config directory.
Then rename the files to the Sam, Default, Security, Software, and System without extensions. After moving the drive back to the original system, it should boot.

It sounds confusing, but it really isn?t when you are doing it. If you have further questions, please contact me.

Good Luck,

Vickie

This discussion is closed to new replies.