Bugcheck
The computer has rebooted from a bugcheck.
The bugcheckwas:0x0000009c (0x00000003, 0x00000000, 0xb2000000, 0x0002010a).
Microsoft Windows NT [v15.1381]
How can I correct this problem? I am running SP6. Has anyone encountered this problem?
Windows Forum
The computer has rebooted from a bugcheck.
The bugcheckwas:0x0000009c (0x00000003, 0x00000000, 0xb2000000, 0x0002010a).
Microsoft Windows NT [v15.1381]
How can I correct this problem? I am running SP6. Has anyone encountered this problem?
by mckaytech
This bugcheck code indicates a Machine Check Exception and it's usually thought to indicate a CPU-related hardware problem. Without knowing anything about your hardware, it's not possible to speculate on a specific cause although I would certainly look for overheating, not seated properly in the socket, overclocking, etc.
The first suggestion I would have is that if you're really at SP6, you update to SP6a. SP6 was kind of a troubled release from the beginning.
Then I would make sure that the computer is set up to write a memory dump file (Control Panel-System-Startup/Shutdown). With such a file and a few analysis tools from the NT Resource Kit (primarily dumpexam.exe), you can pinpoint the exact module, driver or process in whichthe failure occurred and that quite often points you in the direction of the driver or other software that needs to be updated or patched.
paul
by rclermont
I was running SP6a. First, the Super Micro P6SBA Mother board will on ly take memory 128 MB in all 3 slots or 64 MB RAM in all 3 slots or 32 MB RAM in all 3 slots. You cannot have 128 MB RAM in Bank0 and have 2 64MB in the remaining slots. That was a problem. The second problem I had was that the Mother board was bad. When I went to re-install SBS 4.5 I could not. I atempted three install without success. Only after I replaced the mother board was I able to install the OS. After that, I didnot have any more problems. My CPU is functioning fine on this new board. Since I replaced mother board and installed memory in 128MB sticks my problems went away. I am now bug free.
Thanks to everyone who contributed to helping me solve my problem.
Regards/Raphael Clermont MCSE
by mpart
I've been getting the same error (with a couple of exceptions, if you'll pardon the expression) on two different machines in the field. I wonder if this is the same problem. The bugcheck is
0X0000009c (0X00000004, 0X00000000,0xB2000000,0x000040151)
Based on the answer you got, I'm wondering the cpus are vibrating loose in transit...
by rclermont
I was running SP6a. First, the Super Micro P6SBA Mother board will on ly take memory 128 MB in all 3 slots or 64 MB RAM in all 3 slots or 32 MB RAM in all 3 slots. You cannot have 128 MB RAM in Bank0 and have 2 64MB in the remaining slots. That was a problem. The second problem I had was that the Mother board was bad. When I went to re-install SBS 4.5 I could not. I atempted three install without success. Only after I replaced the mother board was I able to install the OS. After that, I didnot have any more problems. My CPU is functioning fine on this new board. Since I replaced mother board and installed memory in 128MB sticks my problems went away. I am now bug free.
Thanks to everyone who contributed to helping me solve my problem.
Regards/Raphael Clermont MCSE
by rclermont
This discussion is closed to new replies.
Sort by Trending