9 replies
by cmesupport Accepted solution
by sidekick Accepted solution
Can you see (ping) the Netgear router for the various devices? Are the getting IP addresses? Basically, it the problem between your devices and the router or the router and the cable modem.
If everything seems to be OK between your devices and the router, then can you get to the next hop. Try a traceroute to anywhere on the internet. If you only get to the router, then the router probably can't communicate with the cable modem.
A common fix for this is to, with the router on, power cycle the cable modem.
You can also try pluggin your computer directly to the cable modem to see if that works (don't forget to power cycle the modem again, you need to do this every time you change what is plugged into it).
by cmesupport Accepted solution
by sidekick Accepted solution
From this and the other posts, it sounds like the wireless settings. It kinda sounds like MAC addresses are being filtered, but it also sounds like you are sure you didn't set it up that way, so I'll assume that is not the issue.
Are the wireless devices connecting and getting IP addresses?
Are they getting the right IP settings? (subnet, mask, gateway, DNS?)
Can you ping by IP address to the internet?
Can the wireless devices see each other?
Are there any settings allowing or disallowing devices from the wireless network out to the internet?
Wish I could offer more than the generic troubleshooting, but this will at least help narrow down the problem.
by snuffy09 Accepted solution
"I have set my Netgear router to use my computer's MAC address as well..."
you mean mac filtering?
if so try turning this feature off.
mac filtering will only allow those computers\devices with mac addresses that match the "list" on the router.
by cmesupport Accepted solution
by snuffy09 Accepted solution
you can have a 100 devices on your LAN as long as you are going out one "pipe" comcast is only seeing one ip address.
I would disable that feature, or set it to default, you may have shot yourself in the foot.
by cmesupport Accepted solution
by cmesupport Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending