11 replies
by samato Accepted solution
by sidekick Accepted solution
I would do a an NSLookup to make sure the name is resolving to the correct IP address as the next troubleshooting step. While you're at it, check the resolution of the IP to the server name.
Are you using any other network protocols besides TCP/IP?
by samato Accepted solution
by wizard-09 Accepted solution
Have you got Netbios running names resolve, maybe something to look into.
Keep us informed as to your progress if you require further assistance.
If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.
by sidekick Accepted solution
by samato Accepted solution
NBstat (NBTstat -A 10.14.16.200) reply looks good:
NetBIOS Remote Machine Name Table
Name Type Status
---------------------------------------------
SERVER2 <00> UNIQUE Registered
AGMART <00> GROUP Registered
SERVER2 <20> UNIQUE Registered
AGMART <1E> GROUP Registered
MAC Address = 00-14-22-12-47-22
by sidekick Accepted solution
by samato Accepted solution
by sidekick Accepted solution
Is this a Windows server? If so, you might want to try either reinstalling or resetting TCP/IP. Which one you do depends on which version of Windows you have. I don't remember the specifics on this, but there are MS KB articles on the subject.
At this point, I would probably try using a packet sniffer like Wireshark to figure out what is going on. Just make sure you have permission first, preferably in writing.
by snuffy09 Accepted solution
by andyallcock Accepted solution
Hi,
Did you ever sort this, it's just started on one of my servers?
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending