3 replies
by pappyse Accepted solution
by markp24 Accepted solution
Hi,
Can you provide some information, Are your workstations runing TCP/IP? (Or using netbios or IPX/SPX)
If possible post some network configuration information.
Some things to look at:
If they are using TCP/IP are they configured to use the correct Network? Is the gateway address correct? is the DNS address correct? Can the workstations ping the gateway, can the gateway ping an internet site? Try a Tracert from one of the workstations to an internet site.
Try it both by IP and FQDN.
Confirm your DNS is working.
by markp24 Accepted solution
lets see if we can get this to work
Domain controller - 192.168.1.100
Router address - 192.168.1.1 (I am guessing )
subnet mask - 255.255.255.0 (I am guessing)
the workstations IP configuration
IP addrerss range 192.168.1. X ( "x" representing any unused ip address from 1892.168.1.2 thru 192.168.1.254)
Subnet mask 255.255.255.0
Default Gateway - 192.168.1.1
Dns options (I will use "open DNS" as an expample) (http://www.opendns.com/start/)
more information here (http://www.online-tech-tips.com/cool-websites/free-dns-server/)
preferred: 208.67.222.222
alternate: 208.67.220.220
If you are using yoru Domain Controller as the DNS server you want to use, then there may be a configuration issue in the DNS server setup.
to test tyhat, use the Open dns server listed above, refresh you workstations dns information (ipconfig /flushdns)
then try doing a NSlookup to see where it is attempting to resolve the addresses from.
example:
C:\nslookup www.microsoft.com
Server: PrimaryDNS1.enterprisenet.org
Address: 10.1.5.3
Non-authoritative answer:
Name: lb1.www.ms.akadns.net
Addresses: 207.46.19.254, 207.46.19.190, 64.4.31.252
Aliases: www.microsoft.com, toggle.www.ms.akadns.net
g.www.ms.akadns.net
please let em know if that helps
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending