Discussion Locked

Can't connect to the internet

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a small network running "SYGATE 4.5" on my host. My host is a P-IV running W98. I have four Cclient PC Connected all but one functions fine. An ASUS Pent.I 233 MMX sees the network, will function withing the network but will not connect to the Internet. All settings are the same for all machines. I can even ping the host computer on 1 NIC and and the ISP on the other NIC. ANY SUGGESTIONS?

3 replies

by deadly ernest

I gather from what you have posted that you are using one machine as the link between the network and the ISP by having two NICs in that machine.

If this is so you have to set that machine up to act as a gateway or proxy server for the other PCs.

Essentially you need to set up the gateway to act as a relay for the other PCs and then set them up to talk to the gateway. This is best by having the gateway talk to the network using a static IP address and give that address to your network PCsas the gateway address in the NIC configuration.

One way to do this is to purchase a third party program like Wingate (www.deerfield.com/products/wingate) and install that. This will provide some added security and can be set to require a log on for Internet access.

Is your Internet access a dial up account or DSL, if it is DSL you can get a multi-port DSL modem that acts as the gateway and then allows other PCs to connect to it via ethernet ports.

by ryder007

You may also want to try the winsock update which you can get from Microsofts website.

This discussion is closed to new replies.