Brian,
Start with the physical connection. Is the lights on the switch and nic (if applicable) on.
Try connecting with a known good cable and port that works for one of the other systems.
Can you ping the loop address of 127.0.0.1.
Try getting the new PC to work with just the cable modem's default way of getting connected. Once you can get that up then go after any other connections.
This may be obvious but, if the original PCs have static IP addresses you need to match what they have including subnet mask, Gateway & DNS.
Example:
Cable Modem- 192.168.0.1
Subnet mask for all- 255.255.255.0
PC1- 192.168.0.2
PC2- 192.168.0.3
Gateway- Ip address of the cable modem
DNS1
DNS2
What are the settings on the other PCs? Do you have the IP address of the cable modem or is it getting its address from your ISP. If so you may need to get a router. I would select one with a built in switch. Since you're connected to a 10 mbps switch it may be a good time to get something that can go faster like 10/100 mbps.