Discussion Locked

CD-ROM disappeared

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In my office I have computer Monorail, RAM 64 Mb, HDD 6Gb with installed Windows 98SE, IE 6.0 and all the latest Windows updates. Computer is on the Novell 4.11 network with Novell client 3.31.
I discovered that in device manager CD-ROM disappeared. Also Primary and Secondary IDE controllers are marked yellow sircle with exclamation mark. If I restart in safe mode I can see CD-ROM in device manager, both controllers are also look good. I have read article Q151911 in Microsoft KB, and didn't find the NOIDE value in the registry. Who can help?
Thanks in advance.
Alex

9 replies

by rosine

2 things you can try... install more RAMS
re-install windows.. try this it cannot hurt. You have lots of GB but not enough rams.. I had problems with AOL.. could not download from web.. no one could tell me either the problem.. found out by myself...(after 20 pages of explanations from AOL (no good).. I re-installed 128 mb of Ram.. presto.. can download anything.. no more problems... try it, I bet it is this problem.

by cpd202

Boot up normally and remove both the items with the yellow exclamation on them. Reboot and let windows rediscover them. See if your cd-rom returns to normal.

by thechas

Expand the System branch in device manager, and identify who's chipset is on the mother board (VIA, SiS, Intel).
Download and install the appropriate IDE bussmaster driver.

This will take care of the problem, and improve drive performance. I have seen various software installs blow away the IDE drivers in W98.

by cnlson

here we go.
first right click on my computer and choose properties from the menu. this should give you the general tab of the system properties. please click on device manager tab. if you see yellow ?'s or red x on primary /secondary ide controllers continue if not skip the rest of my post. if they are splatted (the tech term for the yellow ? OR red x you need to pull a key in the registry... make certain you have a backup done. navigate in regedit to hkey local machine\enum select and deletethe mf key. close regedit and restart the computer (start shutdown and then restart). when you reboot new hardware should be located. if it is windows may suggest that you need to reboot to continue setting up changes SELECT NO when you are all the way up into windows restart as above this may take up to three restarts.

This discussion is closed to new replies.