Question Locked

CD-ROM/DVD drive problems

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does anyone know a resource for downloading drivers without having to join some discussion group/club, or paying for a subscription fee? I have a problem with the drivers for both of my cd drives. (Sony CD-ROM CDU5211 & LITE-ON COMBO SOHC-5235K) The system setup/BIOS recognizes them, but when windows comes up, "My Computer" Nor "My Files" can't see the drives. I examined the cables and the master/slave settings and they don't seems to be no conflict and the drive moves in and out with the button. The only thing I can figure is the drivers are corrupted. Any suggestions?

4 replies

by hal 9000

Where there any changes that where made to the hardware before this problem arose?

These devices do not require drivers to be seen in any form of Windows so they should be working if they are properly installed and the User Profile or OS isn't corrupt.

Col

by mkc

As far as I can tell this started just after a crash and a re-install of the OS. I agree that drivers should not need to be installed, except in the case of a corrupt portion of the OS. The fact that both CD divices act the same and are fro different manufacturers ought to be a clue also. but still the info so far indicates broken or corrupt drivers. I just thought if I could find them, I could avoid another reinstall. I was also wondering about interrupt conflicts. Thanks for the reply. mkc

by hal 9000

For the IDE Chip Set controllers if these are unsupported by the default Windows Installation. These will be on the M'Boards CD or down loadable from either the M'Board maker or if this is an off the shelf system from the maker.

You shouldn't need drivers from some external source to do anything here.

Col

This discussion is closed to new replies.