Question Locked

CDRW Troubleshooting

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My CRDW says the CD is full even regardless of whether there is a CD in the drive or not. I'm trying to burn a CD.

2 replies

by hal 9000

Are Media Sensitive and will only work with certain types of Media. This has to do with the Dye used in the CDR's as the color of the laser may be absorbed by the dye and not reflected back. So you can try using a different blank Disc meaning a different Brand not just a different Disc from the same bundle. Try to use Blanks brands that you have used previously if they are available. If not and you have a partially written CD try making a Multi Session and see if it works on a Disc that it's previously burnt. If it doesn't look below.

If that's not the problem the CD Drive itself is most likely no longer working and needs replacing. This is something that is quite common with older CD Burners.

Col

This discussion is closed to new replies.