7 replies
by vinitogupta
by sgt_shultz
examine the info you can get from using ipconfig /all on a pc connected to your B switch. compare that to a pc you can't connect on the lan. ip, subnet, gateway and dns server settings. sounds like a dns issue to me. insufficient data. if you will take the time to word your question more completely you'll discover your own answer
TANSTAAFL
by cg it
by hal 9000
Maybe I'm reading this all wrong but the Router should be connected to the Uplink port of the first hub and then any subsequent switches/hubs should be connected through a normal port to their Uplink port.
You start at the external access point first and then connect to the Uplink ports from the normal output ports of the Hub/Switches not the other way around.
Col
by sgt_shultz
by pgm554
So let me get this right,you are linking 2 Cisco 2950 Switches by using a 10 BASE T hub?
Why?????????????????????
You are crippeling the speed of the network by inserting a bottleneck 10mb half duplex device in between two high speed switches!
Bad design implementation.
Let me guess,you have the switches set to manual full duplex too,right?
The switches should be set to auto only.
And if you want your network to come to a crawl,just continue to use the hub to connect the two switches.
Switch>switch>hub>router = OK
Switch>hub>swich>router = Not OK
by cg it
when I read the question, my first thought was "you gotta be kidding". Then I thought it's gotta be someone making up some stupid senario. It's like anyone with any brains isn't going to be sticking a dumb hub anywhere on their ethernet network. I figured if he's that dumb then he's connecting uplink to regular switch port [or hub port], getting no link, scratching his head and wondering why there's a problem.
HAL is right on desgin. Work from the External link in and pgm554 is right on switch/switch/hub/router but heck whats the hub for if it's just uplinked from switch to router? Better to just uplink to the ethernet LAN port on the router [best if it's a Cisco Router] and toss the hub on the old electronics not worth anything heap. The 2950s with gigabit uplinks with a hub connected to the uplink port it is just nonsense. I'd just do the first 2950 A uplink port uplinked to the second 2950 b uplink port and then on the second 2950 use the A port uplinked to the router LAN ethernet port. Or you could swap around uplink ports or just break down and use one of the regular ethernet ports. Their all configurable for what you want to do with them. He doesn't have to use the uplink port at all unless he wants the gigabit uplink.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending