9 replies
by sgt_shultz
Poster rated this answer.
by dmiles
Poster rated this answer.
by ann777
The following site may or may not help you...
Poster rated this answer.
by sgt_shultz
Poster rated this answer.
by thechas
It's time for a manual CMOS reset.
Note: this does not work for laptops.
For most laptops, you only option is the manufactures service center.
Shut down the PC.
Open the case, and look for a clear CMOS jumper.
Set it to clear.
Power up the PC, and then shut it down.
Return the jumper to the Run or Normal position.
You should be at CMOS defaults, and be able to enter BIOS setup.
If you cannot find the jumper:
Unplug the power cord.
Remove the CMOS backup battery.
Let the PC set for at least 1/2 hour.
Replace the battery.
Connect the power cord and boot up.
Again, you should be at CMOS defaults, and be able to enter setup.
The reason this does not work for laptops, is that the BIOS settings are stored in flash memory, and not battery backed CMOS.
As a security feature, there is no user method to reset the flash ROM.
This way, a laptop is of less value to a thief.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending