Discussion Locked

Computer Freezing

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having problems with pc crashing and freezing up at random times.
I have windows xp professional installed.
I have done various checks but all come back as ok.
When looking in the event viewer it seems to show a lot of red errors on True vector engine and a program called dhcp, Not sure if they are related to the freezing.
Also i have just installed a new Geforce 4 graphic card. And it only seems to be happening since then, Wondering if thats related to it somehow.
Would appreciate any information as to what may cause this problem.
Thank you in advance.

7 replies

by thechas

What was your previous video card, and how did you remove it?

When changing hardware, it is ALWAYS best practice to remove the old device from device manager just before you shut down to physically remove the device.
That way, Windows does not have remnants of the old device driver that it is trying to install.

Next, check your BIOS settings for video and video RAM, and verify that the settings match those recommended by your card manufacture.

How much RAM do you have on both the PC, and the video card?

You want / need to have at least twice as much system RAM as video RAM.
In BIOS settings, the AGP aperture needs to be at least as large as the amount of video RAM, and should be between 2 times video RAM and 1/2 system RAM.
How about drivers?
Have you installed the latest AGP mini-port driver for your motherboard?
Have you tried the latest reference driver from nVidia.

Finally, see if the video card, or motherboard manufacture has an updated BIOS the specifies correcting stability or compatibility issues with video cards.

Chas

by thechas

1 more thought, check and see what version of DirectX your driver supports.

You may need to install DirectX 9a for the driver to function properly.

Chas

by bruce

Yeah, I would look at I/O conflicts first then run a registry scan to ensure there's no unwanted files in there. Also check out MSoft XP web site. Good stuff there.

by bruce

Yeah, I would look at I/O conflicts first then run a registry scan to ensure there's no unwanted files in there. Also check out MSoft XP web site. Good stuff there.

by bruce

Yeah, I would look at I/O conflicts first then run a registry scan to ensure there's no unwanted files in there. Also check out MSoft XP web site. Good stuff there. Finally - keep the PC out of the really cold weather. If it's freezing in your room in may damage it.

by brothamann

If I'm not mistaken, the True Vector engine is directly related to the Zone Alarm product.

To overcome the issues you may need to remove and reinstall the product. Additionally, you may need to upgrade to a newer version.

Hope that helps.

This discussion is closed to new replies.