3 replies
ma2te2-68,
(1) What version of windows are you using ?
(2) Can you pls be a bit more specific when you say windows does not start ?
(3) What type of mouse are you using, Serial/USB/ PS/2 ?
Please give the details and we might be able to helpyou...
by fred07
Hi,
If you pluged the mouse in while the pc was on you have probably damaged the ps 2 mouse port and will have to go to a USB type mouse or a serial port mouse.
Also check to make sure [power off] that the mouse and key board ps2 connections are not switched and in the wrong ports.
I hope this helps,
fred
by aquaris
I am afraid you will NEED windows CD to re-install..
although Windows does have a backup in
C:\windows\Options forlder...but that is highly unreliable.
As far as moouse freezes are concerned.
there could a number of reasons.
1- your Mouse Wheel is not Clean
2- the Wire of your mouse if broken or short
3- it is conflicting with some other device in your system,
this normally happens if you have a soft-Modem that is installed on Com3 though a HSF driver... so checking the ports properties...and removing any IRQ conflict some times solves it..
here is how you do that..
either from the mouse icon in control Panel..
or from the System Appelet in the Control Panel then through the Device manager Tab in it..
expand the Port tree..
Select and click properties...
if there is a conflict then you will find it in the resouce tab for it..
with an option to change IRQ if available...select different IRQ untill the conflict goes away..
also there will be Selectable various conflgration files in there..you can also try them..
hope it helps...
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending