2 replies
by honest_m2002 Accepted solution
by oh smeg Accepted solution
Some require you to have a computer between them and the switch some don't.
You need to setup the Modem with a wired connection to a computer and then when it's working unplug the computer plug the Ethernet Cable into the Uplink Port of the Switch and then plug a Ethernet Cable into the Switch and connect it to the computer.
Apply whatever is required to the Switch in the way of setup and then try to connect to the Internet. If it works it's fine but if it doesn't work that way you need a computer with 2 LAN Cards to connect in between the Modem and Switch.
As for length of Ethernet Cables if it's under 100 meters long it's not a length issue but it could be a Interference Issue. Do Not have any Ethernet Cables within a foot of electrical cabling and check the leads with a Cable Tester to make sure that they actually work and are connected correctly.
Col
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending