Question Locked

Create a TV station with a wireless dongle/router?

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey TechRepublic,

Id like to know whether there is software which can be installed on my Windows computer to stream a tv station through my house to my Pioneer plasma via a dongle/router. Its really hard to find anything in Google, because noone has really said anything about it. What ive looked up so far is that you need to get a media reciever such as a Logitech Squeezebox which connects to your tv/hifi system to stream media from your computer...Also, on the Microsoft website, it was said that you can use Microsoft Media Encoder to stream from computer to computer but im wondering if this can be used in a way to stream through your router on a certain frequency so that that channel can be picked up by my plasma or Topfield set-top-box. But if there's no way of doing this, could someone give a brief description of the reason?

-Thanks Sammy

21 replies

by sammy.morrissy

To my knowledge, i dont think it does. But is it possible to create a tv station through the router on a frequency such as 60 MHz?

by seanferd

so as not to interfere with each other, as per the FCC.

Also, the router will not broadcast an analog or digital TV signal - it broadcasts IP packets.

by seanferd

that you could get.

Are you sure the TVs don't have networking capabilities? Where you could just run an Ethernet cable to the TV, or connect a WiFi receiver to it?

Check the documentation on the TVs, or post the full model numbers.

Also realize that for wireless, the signal quality might be poor, depending on how far the TV is from the router, and anything that could cause interference - walls, etc.

by sammy.morrissy

To tell you what im really trying to achieve is, here.

Computer ---> Live video-output of the computer screen is sent out ---> TV

Ive looked in the booklet. The only way of really doing something close to this is placing my computer next to the tv, then connecting the two up together with a stereo mini jack cable and an RGB cable. That ofcourse, is the last thing i want to do.

by seanferd

But
http://www.comparison.com.au/televisions/Pioneer/PDPLX508A
Lists a PC connector (standard monitor connector, I suppose) and the HDMI connectors. Of course, that means cabling, and HDMI support on the PC for that option.

It looks like the wireless TV-out card and receiver would be your option. Perhaps pricey, so look around, and make sure your PC hardware and OS would support any card you might choose.

by sammy.morrissy

So there's not real way of sending out a signal for the tv to pick up as a channel? You just have to use a TV-Out card to stream to the tv. Either way, the wireless tv-out would still be fine for me! :)

by seanferd

http://sewelldirect.com/wireless-pc-to-tv.asp
It just isn't HDTV, but it is wireless. Actually, I can't see how it matters, as most stuff isn't in HD format anyway. Almost certainly nothing you're pulling off the internets.

I'd say go for it, or something similar. Maybe look up reviews you can find for that unit. You don't want a lemon. :D

by sammy.morrissy

Im the quality sort of guy. I really hate bad quality, so i'd be looking for more of a HDTV unit. Just asking, have you managed to setup your own tv channel using a method?

by seanferd

And HD DVD is not the same as HDTV. Just to keep things confusing.
http://en.wikipedia.org/wiki/HD_DVD

I'd check your files, or the commercial equivalents, to see if they are, in fact, HD in the sense of
http://en.wikipedia.org/wiki/High-definition_television#High-definition_display_resolutions

see also
http://en.wikipedia.org/wiki/High-definition_television#Confusion_about_formats

Of course, you could look elsewhere for a wireless HD PC-TV converter. That one site can't be the only game in town.

Of course, for anything you install in the PC, make sure your power supply is up to it. Beware of the "no extra power cable" devices that draw power from the USB ports, as they may fry the ports, or the device may be severely underpowered from the outset.

Edit: Oh, and no, I've never set up such a thing myself. I've occasionally hooked up a PC to a TV, but that became irrelevant with more recent DVD players which would play all sorts of formats straight off the DVD, like AVI, MPEG, etc. The list is fairly long on some DVD players, even el cheapo ones.

by sammy.morrissy

Well you've answered my child hood dream of owning my own TV station :) (not really). Ill look around for a decent HD PC to TV card or otherwise ill wire my house with a HDMI cable coming from my computer. Thanks alot for the help sean!

This discussion is closed to new replies.