5 replies
by joseph moore
Set up a WINS server on one of the NT4Servers. Then add the WINS address as one of the DHCP options, so the DHCP server sends the IP address of the WINS server to all DHCP clients.
Windows uses WINS (in theory!) to handle all of this name resolution and Network Neighborhood visibility.
So, on a NT4Server, right-click on Network Neighborhood -> Properties.
On the Services tab, click ADD, and add a WINS Server. You will need the NT4 Server CD at this point. Put it in the CD ROM drive, and there you go! That should install WINS.
Reboot the server when WINS install is done.
Next, when the server is back up, put on SP6a. REboot again.
NExt, when the server is up again, click STart
-> Programs -> Administrative Tools -> WINS Manager. I think that the new WINS server should be listed. If not, then Connect to the WINS server (yes, you would add the IP address of the NT4 Server itself).
Then in the DHCP settings, add the WINS server setting.
Refresh the IP addresses on the clients, and the WINS server should then be listed on them.
AFter that, this should work.
hope this helps
by sue t
Poster rated this answer.
Thank you. This worked great.
by miotti
It sounds to me that it looks like a problem with protocols.
If you say that your Win NT connects to the Mac machine just fine, try to check the protocols the NT machine has.
It sounds like you need to install a third-party protocol, 'cause I do not think that Win98 includes it.
Let me know how it works...
Max
by sue t
Poster rated this answer.
by sue t
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending