Windows Forum

Ask something
Discussion Locked

Disk mirroring in HP Netserver E200

0 helpful
5 replies

by pbrs

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two harddisk one is HP and other one is Seagate, I want to do disk mirroring but after selecting the two hard disks by pressing control the establish mirror is not highlighting in the disk administrator.Please tell me what might be the problem.And also tell me how to check whether hard disks has got separate disk controllers.
Thank you
Bharat

5 replies

by jwildwind

We have one HP Netserver here from way back when. HP has a completely different way of installing drives and controllers than say Compaq. I believe they use the "Navigator CD". For what it's worth, HP has free support... if you are so inclined, you can call them at 1 970 635-1000
options 3,3,2
.....

by juandemarco

The Netserver E200 as I recall dosn't have any raid hardware unless you installed it sepreatly. As to how to check if you have 2 controlers, goto the SCSI icon in Cntrl panel, and it will list your scsi chanels and the HDD/Devices that are connected to them. This will include also your ide/atapi controlers.
On your mirroring of the drives, the partition that you wish to mirror, you need to make sure that there is enof unused free disk space on the second drive or no partitions on the second drive to mirror the partition.
If you have any ?'ns just email me.
Hope this helps,
-Juan

This discussion is closed to new replies.