The Specifications of this list several different type HDD's fitted and the SCSI ones only appear to be connected with a RAID Array so if you do not have a RAID Array you do not need this SCSI Driver.
Secondarily as the AIC 7902 is a old SCSI Interface I'm not even sure that you need this as XP at the very least should support this Chip Set SCSI Controller I was using 7902 SCSI Interfaces back in the 98 Days and probably earlier so they should be in the Windows Install Disc already.
So when you try to install XP what exactly is happening here?
Also as the M'Board Data Sheet shows different Specifications to the Siemens Site you may actually have a SATA RAID in which case you would need the SATA RAID Driver and not the SCSI RAID Driver. As SATA Drives are considerably cheaper and can be much larger it is far more likely that you have the SATA RAID Fitted if you have a RAID Array at all.
http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/Boards/Motherboards/Fujitsu/D1691/a26361-d1691-z120-uk.pdf
So what size are the HDD's if they are above 147 GIG they can not be SCSI Drives as they are not made. You would require the SATA Drivers to setup a RAID Array here.
Incidentally Sieman's list XP as an option for this unit so you should be able to source a XP Install Disc from them that is Slipstreamed with the required drivers so there is no messing around.
Col