Discussion Locked

DSL Access or lack there-of

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having huge problems getting my home network to connect to DSL. I have 4 cabled terminations, a DSL router (D-Link), and a DSL modem. On the DSL Modem I have Power on, DSL and e-net. On the router I have power on and the 2 ports that are currently connected on.
I called my ISP they tell me that everything looks good on their end.
I called Alltell they said my signal strength looked great.
I called the ISP help desk and made 15 trips up and down the stairs, turning on and off and plugging and unplugging my router, modem and different computers.
I have a static IP address for the router and am auto-detecting IP addresses on each of the 2 computers on the network.
I have tried going straight from the modem to each of the terminations on the network.
I'm getting a bit CRANKY and want my DSL - how hard can this be?

6 replies

by cg it

if your running W2K/XP open a command prompt [start, programs, accessories, command prompt]and type ipconfig/all and press enter. Tell us what information is provided? Also tell us how you have the TCP IP properties for your LAN connection [NIC] oneach client configured and how your web browser LAN connections [IE is tools, internet options, connections, LAN settings] are configured.

by cg it

also tell us which model of D-Link router you have. Ethernet/Wireless/USB [personally I like the Linksys routers. the setup instructions and manual are clearly written and easy to understand.]

by cg it

if your running W2K/XP open a command prompt [start, programs, accessories, command prompt]and type ipconfig/all and press enter. Tell us what information is provided? Also tell us how you have the TCP IP properties for your LAN connection [NIC] oneach client configured and how your web browser LAN connections [IE is tools, internet options, connections, LAN settings] are configured.

by cg it

if your running W2K/XP open a command prompt [start, programs, accessories, command prompt]and type ipconfig/all and press enter. Tell us what information is provided? Also tell us how you have the TCP IP properties for your LAN connection [NIC] oneach client configured and how your web browser LAN connections [IE is tools, internet options, connections, LAN settings] are configured.

by thechas

Can you see the other computers through the switch on the router?

If not, you may have a wiring problem.

If so, enter the router setup screen, and set it up as specified for your DSL connection.

For my Linksys, I had to enter my user name and password into the proper setup screen.
Then, select the option for always connected.

I started out by getting the connection running properly on 1 PC directly connected to the DSL modem, and running the software from my ISP.

If you can get the connection working from a single PC, then it may be time to contact D-Link and see if they can walk you through the router setup.

It is not so much that this is hard, there are just so many options as to how things are setup between different hardware and ISPs.

Chas

by cobe

I had a problem with my D-Link router after installation. Had to disable the firewall on the router and let XP handle the firewall duties.

This discussion is closed to new replies.