7 replies
by thechas
In answer to your primary question, NO W2K will not automatically detect that you have installed W98 and go to dual-boot mode.
If fact, should you install W98, it will blow away files needed for W2K to boot.
First question, is the drive formatted as a FAT32 or NTFS volume?
If NTFS, you cannot load W98 onto the drive period.
Best practice for setting up a dual boot PC is to have separate drives / partitions for each OS, and load the oldest OS first.
I recommend that you set up a 3 drive / partition system.
C: W98
D: W2K
E: shared data files
Remember, you actually have to install any application twice. Once for each OS.
Their are files installed and registry settings that need to change for each OS when some software is installed.
The device drivers are also very different between W98 and W2K.
As an alternative to a new drive and re-installing everything, you could use Partition Magic to partition your existing drive, and Boot Commander to control your dual boot setup.
You can also install a new drive for W98, install it there, and manually edit the W2K boot.ini file to include the dual boot option.
Chas
by cthomas
by pan 13 x
the best way to achieve is to:
create 3 partitions: win98,win2k and programs:
install win98 on the first partitaion (4 gigs)c:
after you have install the win98. Run setup in windows for win2k. install new os. "( the computer will ask where (put it on d: 4 gigs) format it fat32. if you do this as ntfs. when you are in win98 do will not be able to open the drive. once you have installed a fresk copy , the system will create the boot menu for you. All applications ( such as office and other will have to be install twice) once in win98 and then in 2k. just over write the application in the same location. they will bought work.
This is best complete with a compelte system rebuild. start from a clean slate and you can avoid alot of head aches .
by cthomas
by seandurcan
by cthomas
by cthomas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending