Discussion Locked

Duel Default Gateway Issue?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are having a problem with our Windows 2000 Professional desktops. Here is some background on our issue:

We are running a DHCP server on an NT 4.0 server. We currently have a duel gateway setup in the scope. The 2000 desktops pick up all theinformation correctly including, IP address, Default Gateway, WINS server, and DNS Servers. For a while all routing will work fine but then the 2000 desktops will switch to the second gateway instead of using the first that is specified. We are running a mix of Win9x, NT 4.0, and W2k Desktops and the only ones that do this is the W2K installs.

At first I thought it had to do with a dead gateway issue but I have run tests and the gateway is not failing. We also have noticed the same type of behavior with the DNS servers. The W2K desktops will start using the second specified DNS Server for resolution.

Does anyone have any ideas? Any info is greatly appreciated.

Thanks,

Eric

5 replies

by hberkhoff

My experience is to use NEVER 2 gateways. Always use only 1!!! To bypass your problem is to define a local route to other destinations, or better yet, let the router (1st gateway) decide where the packets need to go.

Use the ROUTE command in Win2K.

by quintar51

2 Gateways is definitely a problem, but if you must use them, you can use the ROUTE command to add both routes, using the 2 different gatways, but set the metric to a lower value on the preferred gateway.

For example, you have 192.168.0.10 and 192.168.0.20 as your gateways. You want 192.168.0.10 to be your preferred gateway.

using the ROUTE command, type

route add -p 192.168.0.0 255.255.255.0 192.168.0.10 1

for the 2nd gateway, type

route add -p 192.168.0.0 255.255.255.0 192.168.0.20 2

The last number is the Metric value. The lower the number, the 'better' the route. The -p makes this route persistent, so you don't have to add it each time you bootup.

This discussion is closed to new replies.