2 replies
by thechas
You should ONLY get BIOS updates from the motherboard or system manufacture.
Further, you should ONLY flash the BIOS IF the update addresses your particular problem.
There are 3rd party BIOS providers such as www.unicore.com But, at $70 for a custom BIOS it usually is not worth doing.
Now, you likely have a hardware conflict.
Some other plug-in card is either using the same resources, or is in the boot loop installing it's own BIOS.
See if the system boots with just the video card and USB 2 card installed.
Place a floppy in the floppy drive to prevent booting into Windows at this time.
If the PC boots with just the USB card, then shut down, and replace cards one at a time until you find the conflicting card.
If the system does not boot with just the USB card, enter BIOS settings, and disable the existing USB ports.
If disabling the USB ports, or not installing a particular card fixes the boot problem, restore the PC to it's original configuration.
Boot into Windows.
From Device Manager, remove the hardware device that conflicts.
Shut down the PC, and remove the conflicting card / USB ports.
Install the new USB 2 card.
Install the drivers for the USB card.
Chas
by hal 9000
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending