Windows Forum

Ask something
Discussion Locked

Ftdisk Event ID: 12 and 14

0 helpful
5 replies

by sir_tuc

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please Help! WINNT Enterprise Server 4.0 (BDC)SP6a installed. On a Dell 2450 Machine
Event ID: 12 Source: Ftdisk
"A stripe set or volume set listed in the configuration information was missing"
Event ID: 14 Source: Ftdisk
"The FT set containing \Device\MissingVolumeSet2Member0cannot be used."
Disk0 has C:\ and D:\
Diskl is E:\
Disk2 is F:\
CD-ROM is G:\

No stripped sets or volume sets exist!

Steps already taken;
Did the most thorough disk checks that WINNT could do on each physical hard drive. Reapplied SP6a. Nothing has worked so far.

I am going crazy with this one. Please help!

5 replies

by sir_tuc

One more thing, EVERY time I go into Disk Administrator I get the following;
"Disk Administrator has determined that one or more disks have been removed from your computer since Disk Administrator was last run, or that one or more disks are off-line.

Configuration information about the missing disk (s) will be retained."

No disks have been removed or added by any person.

by sir_tuc

I despise microsux!!! I read Q139820 yesterday but did not think it applied to me because;

1. I did not remove any disks or members of a non-existing fault tolerant (FT) system.
2. A FT system was NEVER implemented.
3. I did not move the non-existing FT registry.
4. I did not move the non-existing FT subsystem.
5. I did not move a portion of the non-existing FT subsystem.

But it still worked. Congratulations, you win all the points!

This discussion is closed to new replies.