Question Locked

Hard drive won't boot

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i transferred the hard drive to another computer. I connected the IDE Cable ( black or gray connector) to back of it and plugged the power supply connector to it. it booted, and got past the motherboard logo. then I got blue screen, and an error saying something bout hardware may be corrupt or not cmopatible or something.. the error number were like 0000000 7b or 7x something like that. is it possible it has to do wit bio setting?

4 replies

by eclopton

the new drive you installed isnt set to master is it? set it to cable select or slave. more than likely its cable select but its a decent place to start.

by mjd420nova

If you've installed the old drive as the master, then you'll need the WIN CD to boot to in order to do a REPAIR of the OS. It won't disturb any data on the drive but reload the OS with the proper hardware drivers as the old drivers were for a different hardware configuration, thus the blue screen.

by charliespencer

Just to be sure you didn't accidentally damage it, stick it back in the old computer and make sure it still boots in that machine. If it doesn't boot there, you know the drive is hosed.

This discussion is closed to new replies.