Question Locked

How to connect a lap top "Vista" to a printer on a XP desktop

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a HP printer connected to an XP Operating system desktop PC. I have a Vista Op sys laptop hard wired into a router (can do wireless also through same router)that the XP PC is also wired into. The laptop sees the printer through the network (it is set to be shared), but when I try to access it I get an "Access denied can not connect" error. HP website claims Vista supports the printer. The website setup to check your pc for latest versions of drivers does not work (hangs up after doing 100% check).

The printer has been seen by other non Vista PC's before.

I would appreciate any help. HP claims the printer is not a network device (i.e. ethernet - I knew that hello) but being as it is over a year old they will charge me $35 to check the connections (already done by local PC tech group).

Mike

20 replies

by Member 34533650

Hi Mike,
I am having similar problems.
I have Windows XP PC's - some wirelessly connected and some hard-wired and a Laptop with Vista all networking well - apart from printing!
The Vista Laptop works when a new Lexmark printer is attached directly. However, when the printer is connected to a Windows XP PC the Vista Laptop sees it and connects but cannot print to it.
The Lexmark works with the other XP machines on the network just fine.
The correct drivers for Vista and XP are installed correctly.
There is a great deal of discussion and angst about this on the Microsoft Vista Community Groups.
One suggestion is to connect the Vista machine using a 'local' port to \\machine_name\printer_name.
Another suggestion is to increase IRPStackSize.
Yet another is to allow certain TCP and UDP Ports access....

But nothing has worked for us yet!

So we sympathise!

Allan

by countupir

I would imagine that when you are connecting to a shared XP resource the Vista machine might not being installing or implementing its own drivers. Install the printer locally and capture the printer the way Allen suggests. That will work.

by squirrelking

I was having your exact same problem and I found this solution on some small wi-fi forum so now I'm posting everywhere that I can.

- On Vista PC go to "Control Panel" - "Printers" - "Add printer".
- Believe or not, click "Add a local printer" (I know you want to add a network printer but that way it doesn't work).
- Click "Create a new port" - "Local Port" - "Next"
- In the next box you have to enter a port name like this:
\\PC name\Printer name
where "PC name" is the network name of the XP PC or Network Share where you have the printer and "Printer name" is the network name of that printer. Be careful with this names. Check in your XP PC "Control Panel" - "Printers and faxes" - "your printer" - right click - "share" - "share resources name"
- Choose the manufacturer and printer model of the printer you are adding.
- Now the printer will be added and you can print a test page or print something to test it.

Hope it helps until MS fixes it!

by wolain

I had a similar issue and used the same trick - that didn't work for me at first try. I then updated the printer authorisation via the "server" (XP Home PC) to "shared", but it still didn't work.

Repeating the procedure using "existing port" rather than "add new one". My printer (Ricoh Aficio G500) was not available from MS in the list, so I had to manually download the driver software first, refer the download location in the "have disk" field - then could finally complete the links. Now it worked...

by expertwit

. . . by looking and asking (googling) the proper question! Office has a Konica Minolta C350 BizHub with EFI Fiery imaging system on a network. An associate with Vista (home edition) on a laptop and reps from Minolta have not been able to successfully print from this pc. I was going to stay with XP Professional on my new laptop but hesitantly decided to go with Vista (Ultimate). Our new K-M printer/copier will not be installed until next month. I followed your advice/directions and it works! Thanks.

by kre8sge

Thanks Man! I spent a very pathetic and frustrating hour trying to print to an XP desktop from my Vista laptop with no luck...I was using Windows Help Files and got the usual results (a strong urge to vomit mixed with anger)...Your solution had me printing a test page in under 2 minutes. If MS had people like you doing their help files there might not be people downgrading to XP right now. You really helped me out...TYVM!!!

by mikeygen

I have checked with a number of local suppliers in an effort to buy a newer, faster, etc PC and have been told the PC will not accept most of the XP drivers that he bios and other design parameters will only deal w/Vista and just a few of the XP. I prefer XP for various reasons the most improtant being a lot of my "specialty" programs will only work with XP.

If anyone has any leads to laymans info on the subject and what can or can not be done with a converterd Vista to XP machine please send or post it.

Thanks
Mike

by squirrelking

No problem! Glad to help and thanks for the nomination! ;-)

by tom.rooney

That worked like a charm!!! This problem has been bugging me since I bought the Vista machine. I can't believe MS hasn't fixed this bug -- but I'm sure glad you figured it out. Thanks again

by glenn

I had exactly this problem, did a quick net search for 'network vista XP printers', found Tech Republic, found this thread and solved my problem in five minutes. Squirrelking, I bow down before you...

by azchurch

I've tried most everything on the web. I'm installing printer like you said but it's been 15 minutes now while the Vista tells me it is "Installing printer..." and it looks locked up. Any ideas?

by linda2810

I know this ia an old post but I just wanted to thank squirrelking for posting the answer to this query as I was having the same problem and after following squirrels instructions I am now able use my printer from my laptop.
thanks, Linda

by bouncer25

I just bought this laptop and I've set it up to connect with my XP machine and I've achieved everything except printing. I've spent hours searching for a solution and finally you solved it.
Again
Thank you,
Larry

by d_kern80

Thank you so much for this post Squirrelking - I was trying to connect for 3 hours using the Dell recommended steps with no luck. I don't care how it works or why it works this way - just that it works!

Thanks again

by logicx

Thanks so much!! That did the trick!!

by somefun1

The solution above used to work great for me, but for some reason didn't this time. I did, however, get it to connect by doing the following.
1. Make sure your printer is set up as "shared" on the host (Windows XP) PC.
2. On your Vista laptop click Start > Network. You should see the host PC listed in the Network pane.
3. Click on the host PC and you should see all of its shared folders as well as the shared printer.
4. Click on the printer. A small window will open.
5. Click on the Printer menu and check "Set as default printer".

Hope this helps!
Curt

by tintoman

As far as your printer issue goes I wouldn't be at all surprised (and I assume that your pc is xp home edition) to find that you need to create a user account on your vista machine with exactly the same credentials as your account on the pc, I think this will then give you access to the printer.
Secondly on the subject of downgrading your vista machine to xp your local company are quite correct, if a machine was built for vista it is now more likely than ever that you will not be able to get drivers for everything on there.
However I note that there are now a number of manufacturers offering a choice of either vista or xp.
The reality is that Mr Microsoft is NOT going to withdraw vista so it follows that eventually he intends to fix all the bugs and it will be better than xp one day. those of you who are as old as me (eek!) will remember the same thing happens every time a new os comes out as far a compatibilty goes.
Of course you also have the option of building your own pc - oh go on you know we'll help you

by Former member

Put/load on any of your old program(s) but do NOT install them. Why?, you ask. Well the way Vista works is by locking down every nook and cranny. Anyway lets get back to "OLD programs that wont work under Vista". Right click on the program that you want to install and select "properties > compatibility", then click on "run this program in compatibility mode" and then select ANY Windows you want to run it under, it goes as far back as Win95. When done selecting, now install it.
So who ever said, "it will not work under Vista", does not know Vista very well. I have been using Vista now for over a year and i am running some very old games on it with no problems (as long as you follow the instructions above).
Now as to the Vista to printer issue:
Make sure that XP has "LLTD" installed:
LLTD:
http://www.microsoft.com/DOWNLOADS/details.aspx?FamilyID=4f01a31d-ee46-481e-ba11-37f485fa34ea&displaylang=en
You might need to re-boot both computers when you install LLTD on the XP machine.
Then (on your XP machine) have your printer as "Share", also make sure that the XP machine has "print and file share" marked as "enable" or switched on. Now with the Vista machine click on the Network Icon and search for your XP machine, when you see it click on it and then click on the printer and select "connect" or just click it, it should then connect and then say "installing drivers for printer", when done and dusted (keep the page open), now go to the printer section: "Start > settings > printers" and in here your printer should be seen, if not click on "add printer", then mark it "default printer". Now you do a test print.
Hope this helps you out.

Please post back if you have any more problems or questions.

This discussion is closed to new replies.