7 replies
by oz_media
by ganios
by ann777
Unless you want to start over with Win98 & WinXP, the only other way is to use a third party utility such as Partition Magic, System Commander, etc.
by ganios
by thechas
You do not need a second boot partition.
You should have either a second hard drive, or 2 or more partitions on the existing drive.
As stated in the other answers, you can use Partition Magic to change the existing partition structure on the drive.
Then, use System Commander or another boot manager to allow you to run multiple operating systems.
Alternately, if you are willing to start over and loose all data on the hard drive, you can proceed as follows:
Boot from a W98 startup floppy.
Run fdisk and delete all partitions and logical drives.
Re-boot.
Run fdisk again, and create at least the C: drive primary DOS partition.
If you wish to install W98 on an alternate drive, you will need to create at least 1 logical drive in the extended partition.
I would use 8GB for the W98 partition, unless you know that your file needs would require more drive space.
Exit fdisk, and re-boot.
Format the C: drive format C: /s
and, the logical drive if needed to install W98 on.
Copy at least the Win98 folder from the W98 CD onto the hard drive.
Boot from the hard drive, browse to the copy of the W98 CD, and run setup.
After you have W98 running properly, insert the XP CD.
Follow the prompts to install XP as a dual boot with W98.
Chas
by ganios
by ganios
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending