5 replies
by healer Accepted solution
by spitfire_sysop Accepted solution
First you want to turn off DHCP and DNS on the router. Then use the wizards to add the AD DC, DHCP and DNS roles to your server.
Like in this here handy guide:
http://helpdeskgeek.com/how-to/configure-windows-server-2003-as-a-domain-controller/
by healer Accepted solution
Thanks for the response!
There is no option in my Netgear router to turn off the DNS. I have turned off the DHCP though. By the way what are the pros and cons of having DHCP or DNS on the router instead of on the DC?
by seanferd Accepted solution
You will be managing your network from the DC. Why have anything else interfering with that?
Don't mind the (WAN) DNS, systems behinf the router sending DNS queries take precedence over the forwarders in the router anyway. (Unless 53 tcp/udp passthrough is blocked). Just don't let the router hand out a DNS address via LAN DHCP.
Example con: Power fluctuation and router acts up, gets reset to factory condition. Or gets replaced. If no one remember to manually configure anything, the IP of you DNS server will not be given through the magic of DHCP, and eveyone will eventually have problems reaching LAN resources.
It's just easier to control you network config mostly from one point, unless it becomes more logical to let another device handle something - say, if you start using a proxy server or various network security appliances.
by healer Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending