How to set up a NT network printer?

By "Pass through" I take it you mean so that the server does not spool the print job first.

If that is the case then go to the printer properties, choose Scheduling and then select the option "Print directly to printer"

If what you mean by "pass through" is to have the printer forward its jobs to another print server, here's how:
1) open the properties for the printer
2) select the ports tab
3) click "add port"
4) click local port, then new port
5) in the nameof new port box, type the UNC for the other print server eg: \\server\printer, then click OK

The other print server must be using the same print driver.

Hope this helps,

Ian

If you are trying to send this out to a different OS and that is why you need passthrough go to the server where the printer is installed and add a new lpr port with passthrough remember it has to be all caps.

Check the answer to this thread:

https://www.techrepublic.com/forumqa/thread_detail.jhtml?src=search&thread_id=25639

(You may need to search-and-destroy any spaces in the above URL if you cut and paste it--this software smoetimes sticks one in)

This question was closed by the author