10 replies
by bcomeitpro Accepted solution
by cmiller5400 Accepted solution
For the same model router, just copy the config file from the router to the new one. How you do this depends on what kind of router you are using.
For a different brand router chances are the configuration may need to be rebuilt using their syntax for the commands and interface structure.
by bcomeitpro Accepted solution
For the same model, how and where can I get or see the config file from the router and copy it to the new one? Can you list step by step if you don't mind?
For the different one, how can I configure it? What kind of syntax of the commands and interface structure do I use? and where can I get it?
by tobif Accepted solution
This is in reply to the reply of BcomeITPro to this comment:
As smiller5400 indicated in the inital answer, the HOW depends on what make and model your router is. If you don't tell us what make and model your router is, we'd have to either guess, or give you the instructions for every possible router out there. Neither of which is really useful.
by bcomeitpro Accepted solution
by agube Accepted solution
yes it not quit a big deal than to just long into the router withe ip 192.168.0.1
with user name admin and password admin or you simply run the software of the router purchased and follow the instruction and configure the router.
by cmiller5400 Accepted solution
by bcomeitpro Accepted solution
by cmiller5400 Accepted solution
by oldbaritone Accepted solution
If the network is well-documented, it will be easy to set up the router. (snicker, snicker)
Most likely, you will need to reverse-engineer the network to find out what's happening and why. If you don't, you're likely to miss something important unless you are just copying the configuration into a duplicate (same make/model) router.
Dump the full router configuration, and understand and document why each of the settings are the way they are. It's OK to say "router default", but it's also important to document the effects of that setting.
Good luck - because most places don't want to give you time enough to document, and then they scream when things go down and you can't figure out why. When they want a change, the documentation makes it easier to foresee side-effects the proposed change may cause.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending