Windows Forum
1) com 1 & com 2 both have an yellow ! when i go to device manager.
2) i have a problem connecting an acer scanner with xp.
3) when i plug into a cd-rom with a head set, there is no music.
by thechas
1. Check for resource conflicts.
If you don't use the COM ports, remove them from device manager and disable them in BIOS settings.
2. Which model Acer?
Older parallel port scanners may not be supported in XP.
Acer is now going by the name of BenQ.
Here is the link to the US driver page:
http://www.benq.com/drivers/imaging_drivers.html
3. When digital data mode for CD audio is enabled, many CD players disable the analog output and thus disable the headphone jack.
You need to open properties for your CD drive, and uncheck the box for use digital audio.
You may then need to plug in a CD audio cable between the drive and your sound card to listen to CDs through the computer speakers.
Chas
by thechas
In XP, to get at the Digital Audio setting,
Open device manager.
Expand the branch for the CD drive.
Select your CD drive and select properties.
On the properties tab, uncheck the box that says Enable Digital CD Audio for this device.
Chas
by zero_save
1-plz write ur motherboard model and manufactuerer.
then u must check ur motherboard chipset and it's driver instalation.after that if the problem remind with no change u must check ur motherboard for phisically damaging in it.after these check if ur problem not solved notify me and write more detail about ur problem to solve it.
2.-
3.-
This discussion is closed to new replies.
Sort by Trending