Discussion Locked

i need help!!!!! won't boot

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

ok...i installed a program and my screen flickered.... now it wont boot. goes through sequences to log on then it says *not enough quoto to do command* wont go into safe mode, wont read CDrom. nothing.. any help please...

megan413@bellsouth.net

megan

2 replies

by donaldherberthodges

Megan: If you are using Windows 2000, insert a emergency startup disk into the floppy drive. The system should boot to the A:\ drive. At the command prompt, type C:\. If the system respond with C:\>, you are into the c drive. What this means is that the hard drive file allocation table (sectors and clusters) is in tack, but the first sector on the hard drive, which holds the boot record, is corrupted or damaged. This is why the system will not boot from the hard drive. While you are in the "c" drive, type "format /mbr". Sometimes this command is successful in repairing a faulty master boot record. Reboot the system. If the command worked, the system should boot to windows. If this internal command does not work, there are good utilities, such as, Norton Utilities and Nuts and Bolts Utilities, that have the capability of repairing hard drives.

by andyid

Try this one, if you are using Win 2000 or Xp make sure your BIOS is set to boot from the CD Drive. Boot from the WIN2k or XP disc. Select repair using recovery console when recovery console has loaded, choose the installation you want to repair (should be c:\windows) use the FIXMBR command

This discussion is closed to new replies.