Windows Forum

Ask something
Discussion Locked

Install ISA2000 Server

0 helpful
3 replies

by bhrdwh

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I need to install ISA2000 Server internally for testing. I have a Windows 2000 Server (sp3) with two lan cards - Lan1 (192.168.101.101/24 & Gway 192.168.101.1) and Lan2 (172.16.100.1/32). The clients are on 172 lan card side & cant access/ping 192 lan.
I have done ISA-SP1 & set up Schema (initalliy) on it. It did not give out any errors. Also have give full protocol access to source/destn.

Any one has ideas ?

Akash

3 replies

by cg it

could be a couple of things. First is the gateway IP address scope can not be in the LAT. If it's in the LAT delete that scope. Next is install the ISA server firewall client software onto clients. Next is access policies rules. The default rules created specifiy on group [internet access group] as having rights to access the internet. Add those accounts [including the administrator account]that you wish internet access[which is your gateway IP address] to that group. next is IE settings. ISA server acts as a proxy server so IE settings have to reflect the proxy server [W2K server] and also a port other than port 80 [IIS uses port 80 and will conflict with ISA server[proxy server] use port 8080 [as a trial].

by cg it

note: access policy rules are ISA server policy rules and can be configured via the ISA Management console.

by bin2kkk

1,isa will auto generate class a,b,c as internal,see LAT,if u see both2(172,192),delete one
2,do not forget to install isa client,it will set ur client automaticly

This discussion is closed to new replies.