Discussion Locked

Install problem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a system that I have two AMD 2400 processors on a MSI K7D Master 6501 motherboard and 1GB DDR ram and two segate 7200 120 GB Hard drives. When I try to install Windows 2000 pro the install hangs at installing devices, I put the HD on another system and installed Windows 2000 on it and now I get the error unavailable boot device. I belive the problem is that I need to add drivers for my MB but How do I do that with out getting the OS going.
Dennis

3 replies

by curacao_dejavu

your system is not w2k compatible.
If it's a brand computer check with the manufacturer.
If not check the manufacturer of the motherboard, flash upgrade the bios to the newest one they have.
and try with smaller harddisk, I am not sure but the limit of a harddisk in w2k without a service pack may be 40 or 80 GB.

You can not install w2k on a one computer and then take the harddisk and put it in a second one.
Unless the HAL is the same (basicly it must be the same computer model) it won't work.
Under the current configuration xp has a bigger chance to install then w2k.

regards

Leopold

by dennisbv

Poster rated this answer.
The problem was the second processor. Windows 2000 needs to be installed before the second processor

This discussion is closed to new replies.