2 replies
by nettek
Two things:
As a general rule, the older OS must always be installed first. Install 98 then XP.
Second, you should install the two operating systems under seperate partitions.
However, be aware that XP has a "compatibility mode". If you need to run older software, you can simply right-click on the executable, select "properties" and click the "compatibility" tab, then select the OS type you want to run the program under.
by thechas
1 possible cause of your problem installing W98 is that the hard drive is likely formatted as a NTFS volume. W98 CANNOT read or access NTFS volumes.
To change your drives partitioning WITHOUT formatting, you will need to use a 3rd party utility such as Partition Magic.
Make sure that you get the latest version with NTFS support.
CAUTION: Even though there are seldom problems with Partition Magic, it is a good idea to back up any critical files BEFORE re-partitioning your drive.
Once you have the drive partitioned, and a FAT32 volume formatted, you should be able to boot from a floppy and install W98 onto the new partition.
After W98 is installed, you will need to edit the boot.ini file in the root folder of the XP drive.
I don't remember how, but there is a way to automatically do this from XP.
Here is the contents of boot.ini on my PC:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
There is a command list for boot.ini in the Windows help on XP, or at www.systeminternals.com
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending