5 replies
This is tight, i guess you would have to get an external cd drv and hook it up via parralel port or usb.
This is the most hustle free :-) way around your problem.
by lumberjack
If you have a very near identical laptop with cd, then swap HD round and install -
whatever solution - make sure you copy the .cab files onto HD for later use!
by nccorthu
Can you find a Backpack or other portable CD Rom to connect to it.
If so then copy Win (8 into the machine after Fdisking and Formating as needed and load the OS.
Alternative is to take the Hdd to another identical machine load it and hope.
by thechas
1 way to do this, is to get a 2.5" to 3.5" drive adapter kit such as this one:
Mount the notebook's hard drive as a slave in a desktop PC. (I use a "hot-swap" bay on my main system for just this kind of work.)
Partition and format the drive as a bootable volume.
(If the drive is large enough, create a 1GB or larger extended DOS partition with a logical drive to store the Windows CD and other system files.)
Copy the Windows 98 CD onto the drive.
C:\Win98 or the folder name of your choice.
(D:\Win98 if you created the logical drive.)
It may be worth it to download and copy the system drivers for the notebook, any software you want to install, and Windows updates.
Place the drive back into the notebook.
Boot up.
Switch to the folder with the Windows CD:
cd win98
(or D: {press enter} cd win98)
Run setup.
If you leave the cabinet and driver files on the notebook, you will NEVER need the Windows CD to install any optional components.
Chas
Just mentioning another option,
via a network if there is a built in adapter, you can copy the win98 folder to the hd and start the setup or buy a usb-nic and do the same (assuming you have a network of course.)
The real answer is that you needa external cdrom, because after the win98 install you still need to install the additional programs that you need.
Leopold
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending