Discussion Locked

IP Address Query

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
At the moment, the way our network is configured is as follows: if a workstation, that has a fixed IP address, is shut down then that same IP address can be picked up and used by another workstation that does not have a fixed IP address.

Does anyone know how what I need to do to make the IP addresses of the fixed IP address computers not to be used when those machines are switched off?

7 replies

by tduval

If all PCs have fixed ips, they never can use anyone else adress.
I think you have some computers waiting for DHCP server. And, may be, a DHCP server on.
Or, if W2K or XP workstations, they get automatics adresses, in the range 193.x.x.x, that could conflict with your network.
Manage your DHCP server so as not to serve used adresses.

by rdunn

If you are using MS DHCP Server you should configure the 'Reservations' option. This would be pretty easy to do as long as you know the IP addresses ahead of time. Otherwise, you might be chasing it down for awhile trying to figure out who has what.

This option will force the server to only distribute IP addresses outside of those reservations. We do it here all the time to keep PCs from stepping on printer queues.

by ann777

What are you using as your DHCP server?

In WinNT Server, you assign a "scope" of addresses. You can also "exclude" addresses or ranges of addresses within that scope.

For instance, say 192.168.1.100 - 192.168.1.200 is currently in the DHCP scope. If you have printers or computers with a fixed ip address of 192.168.1.115 - 192.168.1.125.... then exclude that range from your scope.

In other words, with my example, the scope should be 192.168.1.100 - 192.168.1.114 and 192.168.1.126 - 192.168.1.200

This way the fixed ip addresses are out of the range and WinNT will not assign those.

This discussion is closed to new replies.