6 replies
by sue t
by choppit
by jschein
1) Download Jetadmin - run - reboot - add jetadmin port...
2) Through lpt1 or lpt2 with a DOS command..
Use the net.exe command to establish a persistent connection. To do this, use the following syntax at a command prompt
net use lptx \\printserver\sharename /persistent:yes
where x is the number of the printer port that you want to map, where printserver is the print server sharing the printer, and where sharename is the name of the printer share.
For example, to map LPT2 to a printer shared as Laser1 on a print server named Pserver, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd, and then click OK.
Type net use lpt2 \\pserver\laser1 /persistent:yes, and then press ENTER.
To quit the command prompt, type exit, and then press ENTER.
So... Recapping... Share the printer on pc (pc named computer1 and share the printer as printer1)
Create yourself a batch file on the computer using dos and make sure it is in the startup. The batch file should say:
Install the driver for that printer on lpt1 - if you have no local printer
on lpt2 if you have a local printer.
net use lpt1 \\computer1\printer1 /persistent:yes
(or lpt2 if you have a local printer)
that's all there is to it.
Good luck.
by rdgates
Brooks Internet Software has a utility to let you print over an IP address.
They have a free trial, check it out it's easy to use and gives you other features like print clustering. Good Luck.
by ctmoore1998
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending