5 replies
by zeke3 Accepted solution
by computercookie Accepted solution
by zeke3 Accepted solution
by oh smeg Accepted solution
Don't leave Disc's in the drive unless they are being used. The Optical Drive life is dramatically shortened if you leave Disc's in the drive when not being used.
Make sure that the Data Surfaces of the disc's remain clean of finger prints & scratches.
Add extra Case Fans to prevent air being sucked in through the Optical Drive openings. Dust turns into mud in rainy weather or cases of High Humidity and Mud causes Short Circuits in the Optical Drives Electronics. If you need to add case Fans make sure that you have more sucking air in than blowing air out of the case. If you maintain a Positive Air Pressure inside the case you reduce the risk of dust & other rubbish getting sucked in through the openings in the Optical Drive. Ideally you should have air flowing in the front of the case and out the back to keep things inside cool and have the correct Air Flow to prevent [b]Hot Spots.[/b]
If you regularly use one Disc a lot install a Virtual Optical Drive and copy the Disc to the HDD. This allows much faster access to the Data and prevents unnecessary use of the Optical Drive.
Use a CD/DVD Cleaner regularly to prevent the build up of rubbish on the Laser Head.
Most of the above is only good after the event but if the drive is still working just removing a Disc and not leaving one in there will prolong it's life.
If you have 1 Disc that is unreadable or a couple while others are working look at the Data Side and see if it is a recorded one or a manufactured one. If it's a Recorded one look for damage tot he Dye Layer if it doesn't work reliably and rerecord it if possible. If you are unable to rerecord it burn another one.
Col
by zeke3 Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending