Discussion Locked

Loading cd-rom without rebooting laptop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a HP Omnibook 4150 laptop running NT 4.0 and Service pack 5.

I would like to be able to remove the floppy disk drive and install the cd-rom drive without having to reboot. Is there any way to make it load the drivers? Can it be done if booting from a startup disk?
I have purchased a used laptop from a now defunct company and I did not get a working password to enter the F2 setup function. I would like to format the hardrive to remove all their old applications and data and just reinstall Windows98. The problem is that the floppy disk drive is bootable but not the cd-rom drive. I only have Windows98 on CD which begats the problem. I have not had any luck thus far in using Lophtcrack 2.5 to "crack" a viable password. Any help would be greatly appreciated.

Terry

4 replies

by shasca

Most HP systems have a "clear password" switch on the system board. That would let you get into BIOS to do whatever. HP has a lot of info for your Omnibook on their site

by mckibbentw

I appreciate the attempt but have not found a "reset" switch on motherboard yet. Have been searching HP site. Will let you know if I find something that works for me.

Thanks,

Terry

by nettek

First part:
With NT, you must boot the OS with the CD-ROM connected. You cannot load the drivers later.

As far as resetting the BIOS password, the following was taken from HP's web site regarding laptops:
If the user forgets the system password, the user calls Technical Support to determine the proper removal procedure. The user must provide proof of ownership, and the OmniBook must be operated during the procedure. The password removal procedure is protected as HP Company Private information. There are a restricted number of locations that can perform password removal. It may not be disclosed or distributed outside those locations. Password removal is strictly controlled. Hewlett-Packard and authorized support providers must ensure with written evidence that the OmniBook being ?cleansed? is actually in the possession of the unit?s actual and current owner. This requires a sales receipt showing the unit serial number and owner?s name, or a written statement from the owner attesting that he or she is the owner of the unit. The statement can be a fax copy of the document.

by jackofalltech

Space does not permit details but this will work.
1. Create a boot floppy that creates a RAM disk, copies the OS files to the RAM disk, changes the comspec to point to the RAM disk.
2. Among the files copied to the RAM disk you need DRVLOAD (free from PC Mag) and the CD (generic OAKCDROM.SYS for IDE).
3. Boot floppy, switch drives, use DRVLOAD to load CD driver, load MSCDEX.

If you can't figure out how to do it, email me and I'll create a floppy image and send it to you.

Ralph

This discussion is closed to new replies.