4 replies
by jktravers Accepted solution
by hal 9000 Accepted solution
The fastest way if you have an OEM Install CD is to do a repair install of XP though you'll most likely need to hunt down some drivers as they are unlikely to be on the Windows CD. If you only have a Slipstreamed Recovery CD that will not work as it doesn't have a complete set of drivers on it so you need either a OEM or Retail copy of the same version of XP to do an In Place Install like this,
http://preview.tinyurl.com/g4bv8
OH you'll also need the Product Key for the old install of XP as well. And once this is done you'll have to apply any Service Packs & patches that have become available since the CD was made.
Col
by Former member Accepted solution
by hal 9000 Accepted solution
Provided that he has a complete install CD all that should be required is to reset the BIOS with the new HDD installed unless that is set to Auto Detect and then work from there.
Though if they only have a slipstreamed Recovery CD to work from there will be a swag of driver issues that are not supported.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending