Windows Forum

Ask something
Discussion Locked

Mini Drivers

0 helpful
3 replies

by fritz2

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have all of Iomega drivers for my Iomega Mini 128 USB. Any suggestions.

3 replies

by carlos.nino

I suppose you mean that it doesn't work. Make sure that your OS has the correct and up-to-date drivers for USB ports.

by pierrejamme

1.) Make sure you have turned on your USB in the BIOS.
2.) Also check your motherboard site for a more current BIOS update, you can see the version as your computer is booting, may have eto to get rid of bootup bitmap.
3.) Is the Iomega Mini, USB 1.1 compatible, if you have an older computer you probably don't have USB 2. You may need a USB PCI card to get USB 2.
good luck,
Peter

by thechas

A few other points, USB devices do NOT work on Windows NT and most Windows 95 systems.

For Windows 2000 and XP, you should not need to install drivers.

For Windows 98 and Me, you need to install the drivers BEFORE connecting the drive to the USB port.

Chas

This discussion is closed to new replies.