Discussion Locked

Modem Dials but Doesn't Connect

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am having trouble with a modem, it will dial but does not connect, after awhile you will hear a sound that sounds like you left the phone off the hook. The phone line has been checked and it is fine. When I try to connect it says a cannection cannot be established or the server is not answering but the internet provider says it is OK that it has to be something in the computer causing the problem.

7 replies

by highlander718

first you have to try dialing a normal phone (your cell, or something you can check directly). If the phone rings, your modem should be fine.
If you wat to go in more details, go to Properties -> diagnostics->query modem, if no eror messages are coming up, the last thing to check is the phone line and dialed number, make sure is functional and that the line is analog (not digital as the ones usually used in offices with extensions withouth direct outside access)

by jwempen

I tried dialing a normal phone and the phone does not ring. We even replaced the modem and it still does the same thing.

by deadly ernest

The two most likely areas of non-connectivity with a working modem are incorrect drivers and incorrect modem settings.

The first happens when the loaded modem driver is NOT the correct driver for the country you are in, this rarely happens in theUSA as most default modem drivers etc are for the USA phone system. But this is very common outside the USA, the default Windows etc drivers are for the USA phone system and your phone system is different. This is a big problem here in Australia. The best way around this one is to go to the modem manufacturer's site and get the correct drivers. the second best answer is to change your modem settings so that it does NOT wait for a dial tone before dialling, 80% this will allow the connection to work.

The common settings that cause trouble are the modem system settings be on pulse for a tone phone, they don't like that; and the phone codes for outside lines or disabling call waiting. If you have call waiting on your line you have to turn that off or it interferes with the modem connection.

by riverfreight

I never did this butwent with my father a couple of times and saw this - see if the plug is plugged in; next if that is so then see if you've got a good connection, still don't work? My dad is dead and he did TV's, I have reached the extent of my household wiring knowledge and am not a tech but a lowly General Computer Operator and can only hope someone else can addrewss these classic bad connection symptems.

RIVER FREIGHT

by gbxtr

Check your dialing properties if you haven't allready. Make sure you are dialing the correct prefix, area code, number to get outside line, etc.

Create a new dial up connection and start from scratch by dialing a cell phone or something you can test with. Totally un-install the modem, reboot, shutdown again and re-install modem and load latest version of the modem drivers.

Check the phone jack you are plugged into with another phone using your computer phone line and make sure your test phone can dial using it. Could be a wiring issue or bad phone cord.

by aquaris

it seems more likely a faulty modem...I would suggest to replace it..

if it is under warranty...then you can get a replacement.

One more suggestion..try hard modems not soft or win modems they are more likely to cause trouble.

This discussion is closed to new replies.