Question Locked

MS Event ID 1006 and 1030 source - can't figure it out

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all,

I keep getting these Event ID's logged in two different servers. I have asked the tech whos id shows up everytime but he doesn't know why they would get logged. He swears he's not running any scripts.
Is there a way to find out if he's really running a script/batch of some sort. These events come up at different times through out the day.
Thanks
WL

(The user name/server and domain has been changed from original in this posting for obvious reasons)

Error 3/28/2007 1:47:25 AM Userenv\015
None 1006 BWORNS$ NETCOMPRSV\015
Windows cannot bind to NET.COM domain. (Invalid Credentials). Group Policy processing aborted. \015
\015

\015
Error 3/28/2007 1:47:25 AM Userenv\015
None 1030 BWORNS$ NETCOMPRSV\015
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this. \015

8 replies

by hal 9000

They are the one who commissioned the unit. If you where to wipe it clean and perform a clean install with your user ID the error messages would come up with you as the person responsible for the error. That's about the only sure way to make sure that nothing unwanted is being done to these Servers but it's really a bit extreme.

As for the error messages that you have listed they seem fairly harmless and could just be part of the way that Windows is working in your situation. It's a bit hard without knowing which version of Windows is being used but these errors don't look like anything to worry about they look more like a bad load of some software which is very common with any windows install. Something like Norton's Systems Works may reduce or cause them to cease if you run the Disc Doctor Utility which does fix a lot of Load Problems but by the same token it might not have any effect either particularly if the .Net 3 is involved.

If I was the tech involved here after not being believed and having someone gone behind their back I would be looking for a new job ASAP and be out the door as fast as possible. If you don't trust the Techs they shouldn't be working there as they can get into anything that they want to if given sufficient reason. However generally speaking most are too busy with their normal work to go about making more for themselves.

It's only when you Pi$$ Off ones like the child who posted above that you get problems.

Col

by wplecko

Additional info.
Both servers are Win2003.
The tech did not install them.

If anyone received simillar events and managed to pin it down to the root please let me know.

Any suggestions on how to track what this username is running and from where it originates.
Besides enabling audit.

Thanks,....

by hal 9000

MS Event ID 1006

http://tinyurl.com/227unk

Which basically means that the default user who in this case is the Tech who is working on the system occasionally is being shown as the default user. Not a problem

MS Event ID 1030

http://tinyurl.com/3d6j6p

which here is a basic description taken from the same web page

[i]When you resume a computer that runs Microsoft Windows Server 2003 from standby, the computer may stop responding. Additionally, the "Applying Personal Settings" message box may appear for up to an hour before the desktop appears.

Typically, when you resume a Windows Server 2003-based computer from standby, the computer is locked. You must log on to the computer before you can access the desktop. When this problem occurs, the workstation is not locked, and the Windows Server 2003 logon screen does not appear.

Additionally, you may log the following event messages in the application event log on the domain controller after you restart the Windows Server 2003-based computer: 1058[/i]

Basically means that the computer isn't coming off standby correctly and goes on to list a Registry Hack to cure the problem but as both the error messages are not being shown and or there was no complaint of the desktop taking up to 60 minutes to recover this looks like nothing more than a minor glitch to the system which doesn't really require anything unless there are other unlisted problems.

But the one thing constituent is that there [b]Are No Scripts Running[/b] that are causing these error messages to be shown.

Now are you satisfied that no one is doing anything wrong except maybe M$ who have foisted a second rate OS onto people and causing fingers to be pointed when there is no need?

Perhaps it would be a good idea to change delete the techs account and create your own but not in that order so that you can see your user ID constantly coming up and then start to question yourself as to what you are doing improperly on these servers. As currently unless there is something else unlisted there is nothing going on here that isn't a M$ induced minor problem.

Col

by anil

I solved this problem by resetting the disconnected sessions at the server that recorded the 1006 and 1030 events. It appears that the password for the account used to open those sessions changed while the session was still active and for some reason the session was not reset.

This discussion is closed to new replies.