Discussion Locked

Network driver loads on bootup

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a W2000 system. Every time the system starts up it try to install a network driver "Net FIrewall" The driver can never be found and I have to cancel out of the install.

In addition when I go to the Device Manager under network adapters I see multiple entries for Net Firewall and unknown device. I cannot uninstall any of these.

I have a wireless card that continues to work correctly.

I am running Zone Alarm Firewall and used to run but have uninstalled Tiny Personal Firewall. The problem started around the time I uninstalled TPF.

THanks
Sandeep

3 replies

by curacao_dejavu

First login on the support site of TPF and search if that particular problem is known. (you have to register with them.

2nd if the previous doesn't work;
open a dos prompt and type "regedit"
this will open the registry editor, search on firewall and net firewall and delete those entries.

remember to make a backup of the registry before attempting this step.

Leopold

by shasca

In Device Mnanger can you disable the suspect devices reboot then see if error goes away? If so try uninstalling them then. Otherwise you will not get rid of the found new hardware error until you can tell Windows what the device is.

by tictag

You could also try:
- Using SAFE MODE to uninstall the devices, they will be listed but will not have loaded.
- Check your adapter (LAN etc) properties and uninstall any anomolies.

Regards,
Tictag.

Your adapter shoud have by default:
-Client for Microsoft Networks
-File and Print sharing for Microsoft Networks
-TCP/IP
(possibly Network Monitor if YOU have installed it)

This discussion is closed to new replies.