Discussion Locked

networking xp and 98

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I network XP with 98ME and 98SE, AFTER I run the Networking wizard?

11 replies

by nusferatu22

After running the Networking Wizard disk, you have to specify an IP address in your windows 98 machine. It must be in the same class with your other Computers on the network (i.e. 192.168.0.xxx) where the xxx is diffierent in each computer. the range is from 1 to 254.

by sgt_shultz

can you see each other in network neighborhood? do you have 'shares' created on each machine?
tell us where you are at so we can help more. do you have machines connected thru a hub or switch? or directly to each other. if the latter, a you using across-over cable...

by bob the builder

The main thing to consider is networking protocols. Each workstation requiring comms with another should have the same protocol on it.
If you are using TCP/IP have you go NetBIOS over TCP/IP enabled. Be careful about naming your XP PCs, about 16 or more characters in the ComputerName and 95/98 based systems will not be able to recieve any services from them. Have you got File and Print sharing enabled on the PCs?

This discussion is closed to new replies.