Networks

With the ISP and then plug it into the Uplink Port of the WiFi Router and with a wired connection setup the router again with a wired connection.

After the router is setup you can connect to it wirelessly after applying the Security Settings that you started with in the Router to the Conencted Computers.

As to how to setup the Modem this [b]All Depends[/b] on the ISP and how to setup the Router this [b]All Depends[/b] on what Security is used and how many systems need to be connected at the same time. This will all be in the ISP User Help and the Routers Setup Sections. ;)

Col

You plug the Modem into the Connection and Power and then the Ethernet Cable goes to the computer where you use the Setup Procedure to connect to the ISP.

When this is done run the Ethernet Cable from the Modem to the Uplink Port of the Router. This is labeled on the back of the router and is a separate Ethernet Connection.

When the Router is connected to the Modem plug in another Ethernet cable and connect this tot he computer again. Run the Routers Setup Procedure to establish the Security and if you need the Wireless and Wired LAN's to communicate Bridge the different LAN's.

When the Router is Setup if you want this computer to connect tirelessly unplug it from the Ethernet cable and setup the WiFi Connection. ;)

Col

I bought a Chinese Writing Pad in China, after installation, the PC showing unreadable symbol, anyone knows how to make it readable, for your information : my PC is XP, SP3. the Writing Pad is QianCai DJJ-7. Thanks !
JJ
My PC is English Version, do not know if it is compatible with the Writing Pad for use in China?

JJ