Discussion Locked

No Bootup

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Why can't we make computers with instant-on like a PDA? Why must a computer go thru a "boot-up" process every time? Surely, someone else is asking this question esp. with the technology available today!

7 replies

by lumberjack

I think you will find, is that the pdas are always on rather than instant on - just try taking any battery out! you will loose all info and most apps. Instant on powers your display only.

PCs etc would require immense battery power for RAM storage and masses of RAM to hold x Gig of data if it was to work like a PDA. It can be done - laptop recovery from hibernation is generally faster that a boot up. but stil a problem re storage power.

Nice idea for the future - have you thoght of posting this on the discussion site - may get some interesting ideas!

by thechas

In order to reduce the boot time of a PC or laptop, you need to give up a lot of flexibility.

A PDA or other dedicated function device can boot up quicker because ALL device drivers can be in the system ROM, and not need to be loaded from a hard drive.

Further, the PDA OS is a lot smaller than what is on your PC. It is also in ROM which loads a lot faster than from a hard drive.

Yes, PCs could be designed similar to a PDA. In fact, many industrial controllers are small PCs with the OS loaded in ROM.

At this time, the PC market is dominated by cost factors.
The first generation of dedicated PCs that boot from ROM would cost more than their more flexible counterparts, and would be ignored by the mass market.

Chas

by wyrmlord

lumberjack is right, when a PDA is "off" it is in fact in standby mode. Sometimes when I misplace my iPaq and only find it couple of days later (happens sometimes), I cannot turn it on 'cause all juice has run out.

This discussion is closed to new replies.