3 replies
by joseph moore
Actually, with a PPP adapter (what your dial-up connection to the Win2K RRAS box is), the IP address and gateway should be the same.
So that is correct.
I will post a comment Tuesday on more specifics. I don't have time now.
by joseph moore
Ok, to add to the above:
I am looking at my Win2k RRAS server now. I think you need to go to Properties on the server in the RRAS snap-in.
Choose the IP tab.
This is where you set to either use an IP pool for your clients, or to use DHCP to assign IP addresses to your RRAS clients.
Are you set for a static pool, or DHCP?
Either way, the important thing is the bottom of the window, the Adapter drop-down.
Make sure that the Adapter in the RRAS server that points to your internal network (if you have more than one NIC in this RRAS server) is selected in this drop-down. Otherwise, routing will not work.
Next, on this same IP tab, make sure "Enable IP Routing" AND "Allow IP_based remote access and demand-dial connections" are both checked.
Also, on the General tab, make sure the checkbox "Remote Access Server" is checked.
And that is it. RRAS is rather easy to set up, IMHO (easier than a Shiva!).
hope this helps
by jadmin
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending