2 replies
by dmiles
Try checking the power uspply for correct voltage with a volt meter,listen to hear for the fans to spin up,check to make sure fan is clean of any dust
Does the cpu fan spin and have you noticed any overheating problems with cpu,which will cause this problem
by fred07
Hi
Sounds like MB failsafe is working
In bios set to "Halt on no errors"
Start next by removing all cards other than video
Boot up
If problem persists change video card
boot up
If problem persists change out cpu
boot up
If problem persists MB bad
The above is after you check PS as advised in ans 1
If it boots after all removed but videocard [cpu and ram must be present] and no beeps of any kind are heard. add cards back one at a time.
Removing ram should cause beeps at start up
also make sure keyboard and mouse are not pluged in when testing and do not replug them in while unit is on.
fred
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending